Hydrolack DS 15

Primer Overprint Varnish - Water based

Non-enhancing Overprint Varnish for paper and carton with a high drying speed. With the appropriate selection of the substrate a neutral finish with a good scuff and block reistance can be achieved. Recommended for general sealing work and rapid post printing converting.

With varnishing units on sheet fed presses a wet film of 3-6 g/m2 is recommended for most cartons. Higher film weights are achievable with the appropriate drying equipment. Mix well before us! Storage not above 34°C. Protect from freezing! Check viscosity before use.

10/20 kg Can, 120/220 kg Drum, 1.000 kg IBC